Getting StartedΒΆ
In order to interact with your Hottop roaster, you need to ensure your model has a USB-serial port which comes standard with the KN-8828b-2k+.
- Install the CP210x USB driver to read from the serial port:
https://www.silabs.com/products/development-tools/software/usb-to-uart-bridge-vcp-drivers
- Install the pyHotop module:
pip install pyhottop
or python setup.py install
- Plug your Hottop roaster into your laptop.
- Test connectivity to the roaster by running the diagnostic utility:
pyhottop-test test